High resolution

The AV150 is a component of apissys’ line of High-Speed data conversion and signal processing solutions, which adhere to the VITA 47, VPX standard.

Fully compliant with the OpenVPX standard, the AV150 supports a variety of communication protocols, including PCIe, Gigabit Ethernet and Aurora, as well as a large number of user-defined I/O.

The AV150 combines four 14-bit 3 Gsps ADCs and four 16-bit 6/12 Gsps DAC with ultra-high processing power delivered by an AMD Virtex® Ultrascale+™ FPGA (VU7P/VU9P/VU13P).

AMD Virtex® UltraScale+™ FPGAs provide the highest performance and integration capabilities in a 14 nm/16 nm FinFET node. In addition, they offer the highest transceiver bandwidth, highest DSP count, and highest on-chip and in-package memory available in the UltraScale™ architecture. Virtex® UltraScale+™ FPGAs also provide numerous power options that deliver the optimum balance between the required system performance and the smallest power envelope.

Target markets of this AV150 VPX board include Phased-Array Radar Transmitter / Receiver, Electronic Warfare ESM /ECM, MIMO and Wideband Communication.

The AV145 is part of apissys’ range of High-Speed data conversion and signal processing solutions based on the VITA 46, VPX standard.

The AV145 is fully compliant with OpenVPX standard, accommodating various communication
protocols such as PCIe, SRIO, 1 Gbit and XAUI 10 Gbit Ethernet, as well as non OpenVPX adopted
standard such as Aurora.

The AV145 includes one Xilinx® ZYNQ® Ultrascale+™ RFSoC GEN 3 XCZU47DR with the minimum
external resources for low power applications.

The AV145 features eight channels 14-bit 5 Gsps ADC and eight channels 14-bit 9.85 Gsps DAC with
optimized analog performances, making it ideally suited for embedded signal processing applications
such as Electronic Warfare, Wideband Radar Transmitter/Receivers or Wideband Communication
applications.

The AV145 features one internal ultra-low jitter reference and two clock synthesizers and can be used
with external reference for higher flexibility.

The AV145 Xilinx® ZYNQ® Ultrascale+™ RFSoC XCZU47DR provides an impressive processing
capability of more than 5.5 TMACs (Multiply Accumulate per second), four 1333 MHz Arm Cortex-A53
cores, one 512M64 or 1G64 DDR4-2400 SDRAM memory for data processing, two 2 Gb synchronous
FLASH memory for program boot and one 1TB NVMe embedded SSD.

The AV145 provides one GbE, one UART and one USB 2.0 interfaces.

The AV145 comes with an embedded Linux and all necessary cores to build user FPGA applications.

The AV129 is part of apissys’ range of High Speed data conversion and signal processing solutions based on the VITA 46, VPX standard.

The AV129 is fully compliant with OpenVPX standard, accommodating various communication protocols such as PCIe, SRIO, 1 Gbit and XAUI 10 Gbit Ethernet, as well as non OpenVPX adopted standard such as Aurora.

The AV129 combines four 14-bit 3 Gsps ADCs and four 16-bit 6/12 Gsps DAC with ultra-high processing power delivered by Xilinx® Kintex® Ultrascale™ FPGA, making it ideally suited for fully synchronous multiple channels test and measurement, MIMO, Electronic Warfare or Ultra-Wideband Radar Transceiver applications.

The AV129 features an internal ultra-low jitter reference and one clock synthesizer and can be used with either external clock or external reference for higher flexibility.

The AV129 includes one Xilinx® Kintex® Ultrascale™ KU115 FPGA for an impressive processing capability of more than 7 TMACs (Multiply Accumulate per second), two high speed 256M64 DDR3 SDRAM memory for data processing and two 1 Gb synchronous FLASH memory for multiple firmware storage.

The AV129 provides a USB 2.0 interface and a 10/100 Ethernet interface intended to be used for system monitoring and supervision.

The AV129 comes with complete software drivers for Windows and Linux. An FPGA Development Kit is provided including all necessary cores to build user FPGA application.

The AV127 is part of apissys’ range of High Speed data conversion and signal processing solutions based on the VITA 46, VPX standard.

The AV127 is fully compliant with OpenVPX standard, accommodating various communication protocols such as PCIe, SRIO, 1 Gbit and XAUI 10 Gbit Ethernet, as well as non OpenVPX adopted standard such as Aurora.

The AV127 combines up to 36 full duplex fiber interfaces with ultra-high processing power delivered by Xilinx® Kintex® Ultrascale™ FPGA, making it ideally suited for embedded signal processing applications such as Wideband Communication, Phased Array Radar or Electronic Warfare applications.

The AV127 features three fully independent low jitter clock synthesizers for support of most communication protocols on fiber.

The AV127 includes one Xilinx® Kintex® Ultrascale™ KU115 FPGA for an impressive processing capability of more than 7 TMACs (Multiply Accumulate per second), two high speed 256M64 DDR3 SDRAM memory for data processing and two 1 Gb synchronous FLASH memory for multiple firmware storage.

The AV127 provides a USB 2.0 interface and a 10/100 Ethernet interface intended to be used for system monitoring and supervision.

The AV127 comes with complete software drivers for Windows and Linux. An FPGA Development Kit is provided including all necessary cores to build user FPGA application.